SGI Octane III Guide de l'utilisateur télécharger pdf (Page 22)

10 007-5630-001

1: Introduction and Overview

See the information in Chapter 3 for additional technical descriptions of the individual connector

types available on the Octane III system.

Physical Specifications

Table 1-2 shows the physical specifications for the Silicon Graphics Octane III system. See

Appendix A in this guide for additional system operating specifications.

System Power Supplies

Your deskside Octane III system comes equipped with two power supplies. Each power supply

has a separate power cord and is rated for a maximum DC output of 1000 watts at 100-120 VAC,

or 1200 watts at 200-240 VAC. Each power supply is cooled by a built-in 40-mm fan. Each supply

has one (bi-color) status LED on the rear which is visible through the perforated sheet metal panel

at the upper rear of the enclosure.

If one of the power supplies should fail, some configurations of the Octane III can continue to

operate. Systems populated with two compute/graphics trays will require both power supplies to

operate properly. In either case a failed supply should be replaced as soon as possible.

Table 1-2. Silicon Graphics Octane III Physical Specifications

Feature Specification

Dimensions:

height

width

depth

26.5 in. (67.3 cm) Packaged = 35 in. (89 cm)

12.5 (31.7 cm) Packaged = 19 in. (48.3 cm)

28.2 (71.6 cm) Packaged = 37.125 in. (94 cm)

Weight (maximum configuration) Approximately 178 lbs. (81 kg) (max shipping 224 lbs. [102 kg])

Temperature

operating

non-operating

+10 °C (+50 °F) to +35 °C (+95 °F)

-40 °C (-40 °F) to +70 °C (+158 °F)

Humidity (non-operating) < 95% RH, non-condensing

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 77 78

Pas de commentaire

SGI Octane III Guide de l'utilisateur Page 22