SGI Octane III Guide de l'utilisateur télécharger pdf (Page 52)

40 007-5630-001

4: BIOS Information

Air Flow

This is the air flow speed to the DIMM modules. Each step is one mm/ sec. The default is [1500].

Press "+" or "-" on your keyboard to change this value.

Altitude

This feature defines how many meters above or below sea level the system is located. The options

are Sea Level or Below, 1~300, 301~600, 601~900, 901~1200, 1201~1500, 1501~1800,

1801~2100, 2101~2400, 2401~2700, 2701~3000.

DIMM Pitch

This is the physical space between each DIMM module. Each step is in 1/1000 of an inch. The

default is [400]. Press "+" or "-" on your keyboard to change this value.

Serial Debug Message Level

This feature allows the user to set the level of debug messages to be displayed. The options are

None, MIN, MAX and Test.

North Bridge Configuration

This feature allows the user to configure the settings for the Intel North Bridge chip.

Crystal Beach/Direct Memory Access (DMA)

This feature works with the Intel I/O Acceleration Technology (AT) to accelerate the performance

of TOE devices.

Note: A TOE device is a specialized, dedicated processor that is installed on an add-on card or a

network card to handle some or all packet processing of this add-on card.

When this feature is set to Enabled, it will enhance overall system performance by providing direct

memory access for data transferring. The options are Enabled and Disabled.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 77 78

Pas de commentaire

SGI Octane III Guide de l'utilisateur Page 52