SGI Ethernet Card Spécifications Page 51
- Page / 154
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
SG Series Programming Ethernet Configuration and Remote Programming
M550129-03 Rev G 5-21
5.5.3 SETTINGS
The Settings page is available to users who have FULL, Read/Write or Read
Only access to at least one power supply (Read Only users can make no
changes to the settings). In this page you will see continuous updates (2-5
times per second) of the actual voltage output (value displayed on the left)
and the actual live current output (value displayed to the right).
Figure 5-14. Settings Page
Voltage: value above is updated with actual voltage output of the power
supply
Current: value above is updated with actual live current output
Set V: the programmed voltage setting
Set I: the programmed current setting
Set OVP: the programmed over voltage protection setting
APPLY: puts into effect the newly input settings
CC and CV indicators: presently operating output mode of the power
supply, either constant voltage or constant current.
OVP indicator: highlighted red if over voltage protection is activated
- SG Series IEEE 1
- 488.2/RS232 and 1
- Ethernet Options 1
- CONTENTS 5
- GPIB) 7-5 8
- OVERVIEW 11
- M550129-03 Rev G 12
- IEEE 488.2 GPIB/RS232 13
- FEATURES, FUNCTIONS 13
- AND SPECIFICATIONS 13
- READBACK FUNCTIONS 14
- SPECIFICATIONS 14
- IEEE 488.2 GPIB/ RS232 15
- CONFIGURATIONS 15
- AND REMOTE PROGRAMMING 15
- 3-2 M550129-03 Rev G 16
- RS232 SETUP PROCEDURE 17
- 3-4 M550129-03 Rev G 18
- Configuration Switch 19
- Remote/Local Selection 20
- Shield Ground 22
- Address Selection 22
- REMOTE PROGRAMMING VIA RS232 23
- ETHERNET INTERFACE 25
- FEATURES, FUNCTIONS AND 25
- FEATURES AND FUNCTIONS 26
- Programming Resolution 28
- Programming Accuracy 28
- Readback Resolution 29
- Readback Accuracy 29
- ETHERNET CONFIGURATION 31
- AND REMOTE PROGRAMMING 31
- ETHERNET SETUP PROCEDURE 33
- Network Setup Using DHCP 34
- Network Setup Using Auto-IP 35
- 5-6 M550129-03 Rev G 36
- ENTER key a couple of times 37
- BACKSPACE or 37
- DELETE keys 37
- EXTERNAL USER CONTROL SIGNAL 40
- CONNECTOR 40
- 5-12 M550129-03 Rev G 42
- ETHERNET 43
- ETHERNET WEB PAGES, OVERVIEW 44
- M550129-03 Rev G 5-15 45
- Figure 5-11. Login Window 45
- 5.5.1 HOME 46
- IP CONFIGURATION 47
- 5-18 M550129-03 Rev G 48
- SETTINGS 51
- 5-22 M550129-03 Rev G 52
- SCPI COMMAND SECTION: 53
- 5.5.4 STATUS 54
- 5.5.5 POWER 56
- PRESETS 58
- SECURITY 60
- ADD NEW USER 61
- EDIT EXISTING USER 62
- AND SCPI COMMAND OPERATION 63
- Register 65
- Registers 67
- Error/Event Queue 67
- CONFORMANCE INFORMATION 70
- Queries 71
- Conventions 71
- IEEE 488.2 COMMON COMMAND 72
- SUBSYSTEM 72
- M550129-03 Rev G 6-11 73
- Command Description 73
- SOURCE SCPI Command Summary 74
- 6-14 M550129-03 Rev G 76
- Command Description 76
- M550129-03 Rev G 6-15 77
- RAMP FUNCTION 78
- MEASURE SCPI Command Summary 79
- OUTPUT SCPI Command Summary 80
- STATUS SCPI Command Summary 81
- SYSTEM SCPI Command Summary 83
- TRIGGER SCPI Command Summary 88
- (applies to Ethernet only) 90
- 6-30 M550129-03 Rev G 92
- M550129-03 Rev G 6-31 93
- SGI-UNIQUE COMMANDS 94
- PROGRAM SCPI COMMAND SUMMARY 96
- OMMAND REFERENCE 97
- 6-36 M550129-03 Rev G 98
- M550129-03 Rev G 6-37 99
- 6-38 M550129-03 Rev G 100
- Command Description SCPI 100
- M550129-03 Rev G 6-39 101
- 6-40 M550129-03 Rev G 102
- VI Mode Example 104
- OVP Setup Example 104
- Trigger Example 105
- Hardware Trigger Example 106
- Ramp V Example 106
- Ramp I Example 106
- Ramp V Example 2 107
- Power On INIT Example 107
- “Charge” 117
- “Discharge” 117
- 6-60 M550129-03 Rev G 122
- CALIBRATION 123
- SETUP FOR CALIBRATION 124
- (ETHERNET) 125
- 7-4 M550129-03 Rev G 126
- (ETHERNET, GPIB) 127
- CALIBRATION (ETHERNET, GPIB) 128
- 7-8 M550129-03 Rev G 130
- 7-10 M550129-03 Rev G 132
- ANALOG PROGRAM ADJUSTMENT 133
- 7-12 M550129-03 Rev G 134
- Adjustment for Current Mode 136
- Adjustment for Voltage Mode 137
- 7-16 M550129-03 Rev G 138
- M550129-03 Rev G 7-17 139
- SCPI STATUS IMPLEMENTATION 141
- Index-1 145
- FAULT output signal, 5-11 145
- FOLDBACK output signal, 5-11 145
- SG Series Programming Index 147
- Index-3 147
- SAFETY SYMBOLS 151
Produits connexes et manuels pour Mise en réseau SGI Ethernet Card
(41 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.076 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels