SGI Octane III Guide de l'utilisateur télécharger pdf (Page 17)

System Overview

007-5633-001 9

I/O Panel Overview

Table 1-1 lists the standard and optional connectors used with the Octane III cluster server

products. All the system connectors are located on the rear of the enclosure.

While an Octane III server cluster rear panel bulkhead supports the previously listed external

connections, not all will be available/usable with every system. Gigabit Ethernet connections 1, 2

and 3 are optional, and are usable only when an internal Gigabit Ethernet switch is ordered with

the system.

Use of a DVI-I connector is available only with the installation of certain graphics interface

options.

See the information in Chapter 3 for additional technical descriptions of the individual connector

types available on the Octane III system.

Table 1-1 Octane III Cluster Server External Ports Available

Number of ports Type of port Internal port connection Connector used

Four USB 2.0 Connects to head node USB-A

One (optional) SW-console Connects to optional

internal 24-port managed

GigE switch

DB9 serial

One VGA Connects to head node DB-15

One Serial console Connects to head node DB9 serial

One GigE 0 port Connects to Eth 0 port on

the head node tray

RJ-45

Three (optional) GigE 1, 2 & 3 From optional internal

Gigabit E-net switch

RJ-45

Two (optional) DVI Optional graphics card DVI-I dual link (24+4)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 63 64

Pas de commentaire

SGI Octane III Guide de l'utilisateur Page 17