SGI IS2224 Guide d'installation télécharger pdf (Page 79)

ISS3112-RP2 NAS GUI Startup

007-5923-001 63

After you have reconfigured the Primary Network Interface, you should see an “Enabling

message” on the screen similar to:

Enabling ae0 via DHCP...OK.

After choosing your primary IP settings, you need to select no to the reconfigure prompt at the

bottom of the interface screen, see Figure 3-6.

Figure 3-6 Primary Network Interface Selection Screen Example

Choosing SGI NAS Web GUI Transport Protocols

After you have configured the primary network interface, you must choose a transport protocol

for the SGI ISS3112-RP2 NAS WEB GUI (NMV). You can select either HTTP – fast and (plain

text) unsecured, or HTTPS – secured, but less responsive.

Figure 3-7 on page 64 shows an example screen with a WEB GUI port selected to 2000 (the

default).

The example screen also shows the primary networking interface and its (configured) settings. At

this point you should be able to ping the appliance from an external host.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 101 102

Pas de commentaire

SGI IS2224 Guide d'installation Page 79