SGI Altix XE210 Guide de l'utilisateur télécharger pdf (Page 30)

12 007-5476-001

2: Connecting the Adapter to a Network

Figure 2-1 Connecting the Fiber-Optic Cable

Connecting with a Copper Cable

To connect your adapter to a network with a copper cable, do the following:

1. Insert the connector on one end of the copper cable into the adapter, as shown in

Figure 2-2. Ensure that the connector is inserted completely into the jack.

2. Insert the connector on the other end of the copper cable into the connector on the

Ethernet switch or on another computer system (as appropriate).

Note: If your network connects to an Ethernet switch, consult the operating manual for

the switch to ensure that the switch port is enabled and conﬁgured correctly.

Fiber-optic

connector

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Pas de commentaire

SGI Altix XE210 Guide de l'utilisateur Page 30